| Quantity: | |
|---|---|
Description
This truck is modified from Tianjin 4*2 Vehicle Chassis. The capacity of the vehicle compartment is 14 cubic meters.
The compressed garbage truck can carry more garbage in the same volume because the waste can be pre-compressed inside the cargo tank.
Main Assembly | |
| Cab | Single Row, flat-head |
| Engine | Cummins B190 33 |
| Gearbox | Nine Speed |
| Transfer Case | High and low two-speed gear |
| Axle | 5.5T/13T |
| Tire | 10.00R20 (6+1) |
| Electric Circuit | 24V circuit system |
Basic Parameter | |
| Drive Mode | 4*2 |
| Overall Dimension (length×width×height) (mm) | 8830*2450*3270 |
| Curb Weight(kg) | 10360 |
| GVW(kg) | 185000 |
| Wheelbase (mm) | 4700 |
| Passengers(persons) | 3 |
Performance Parameter | |
| Power(kW) | 140 |
| Displacement(mL) | 5900 |
| Fuel Tank Capacity (L) | 300 |
| Upper configuration | 14 square compressed garbage bin, made of high-strength steel plate, with 4mm side plate and 5mm bottom plate, curved box body. Filler lift cylinder with hydraulic lock device, CAN bus control, with automatic operation and manual operation of two control modes. The rear of the car with a barrel turning device (can hang 2 240L international plastic garbage cans at the same time) |
Note: This configuration is for reference only, the actual parameters are subject to the actual vehicle.
Description
This truck is modified from Tianjin 4*2 Vehicle Chassis. The capacity of the vehicle compartment is 14 cubic meters.
The compressed garbage truck can carry more garbage in the same volume because the waste can be pre-compressed inside the cargo tank.
Main Assembly | |
| Cab | Single Row, flat-head |
| Engine | Cummins B190 33 |
| Gearbox | Nine Speed |
| Transfer Case | High and low two-speed gear |
| Axle | 5.5T/13T |
| Tire | 10.00R20 (6+1) |
| Electric Circuit | 24V circuit system |
Basic Parameter | |
| Drive Mode | 4*2 |
| Overall Dimension (length×width×height) (mm) | 8830*2450*3270 |
| Curb Weight(kg) | 10360 |
| GVW(kg) | 185000 |
| Wheelbase (mm) | 4700 |
| Passengers(persons) | 3 |
Performance Parameter | |
| Power(kW) | 140 |
| Displacement(mL) | 5900 |
| Fuel Tank Capacity (L) | 300 |
| Upper configuration | 14 square compressed garbage bin, made of high-strength steel plate, with 4mm side plate and 5mm bottom plate, curved box body. Filler lift cylinder with hydraulic lock device, CAN bus control, with automatic operation and manual operation of two control modes. The rear of the car with a barrel turning device (can hang 2 240L international plastic garbage cans at the same time) |
Note: This configuration is for reference only, the actual parameters are subject to the actual vehicle.
