Dongfeng Street Sweeper Truck Function Introduction

The sweeper truck is a road sweeping and cleaning vehicle in the road sweeper series. It has the functions of road cleaning, road edge cleaning, curb stone facade washing, low-pressure flushing, spray dust suppression and other functions.

The vehicle can be used as a road sweeper alone for road cleaning and suction operations, and as a high-pressure washing vehicle for road washing and suction operations. It can be used in various combinations of cleaning, high-pressure washing and suction to meet the needs of different users. This vehicle can be widely used for daily cleaning, flushing and sweeping operations on main roads and viaducts in municipal urban areas.

1. The appearance of the garbage bin adopts a rectangular parallelepiped shape. The box body is evenly stressed and has strong structural performance and beautiful appearance. The trash can is made of stainless steel and will never rust.

2. The working device adopts the layout of "center-mounted two-disk sweeper + center-mounted wide suction nozzle + built-in high-pressure main spray rod + left and right high-pressure side spray rods".

3. Two central discs + central wide nozzle + built-in high-pressure main spray boom + left and right high-pressure side spray boom structure to achieve road sweeping and vacuuming.

4. The V-shaped arrangement of the left and right spray bars and the no-gap high-pressure nozzle water spray arrangement of the main spray bar built-in the suction nozzle can effectively collect all the cleaned sewage and garbage to the suction nozzle, and absorb it into the sewage garbage bin. There is no dust or water accumulation on the road surface, and the effect of road cleaning, brushing and sewage treatment is good.

5. The clean water tank and garbage bin are arranged separately to maximize the effective space utilization and allow a long continuous operation time. At the same time, the sewage can be discharged through the sewage discharge device during the operation, and clean water can be added at any time to continue the operation; the garbage bin adopts double oil cylinders for self-unloading, and a large-flow high-pressure nozzle is also installed in the box to quickly flush the garbage bin.

6. The left and right high-pressure side spray booms have two-way automatic obstacle avoidance protection and reset functions. It can greatly reduce damage to the left and right high-pressure side spray rods and improve the safety of the entire vehicle during operation.

7. The central wide suction nozzle has a hydraulic floating function, which effectively extends the life of the rubber roller.

8. Using PLC programming, intelligent control system, and centralized control of electricity, hydraulics, and gas, the driver can complete various actions in the cab.

1. This product is also equipped with an electromagnetic diaphragm pump, which provides low-pressure water to the left and right sweeping disks respectively to reduce dust during sweeping operations. The electromagnetic pump is automatically controlled by an electronic control system and does not require manual operation. In addition, this product also has a variety of operating modes set up in the system. Users can start or stop the operation with one click according to the operation needs, which is convenient and energy-saving, and greatly reduces the possibility of misoperation. The cab operating platform adopts ergonomic design. All operating knobs and operating monitoring instruments are integrated on the operating box located on the right side of the driver. It is simple, intuitive and convenient to operate. It has strong competitiveness in the market and product performance reaches International leading level.

2. Dedicated test run: simulate various complex working environments, and all cleaning trucks are physically tested before departure

3. After-sales guarantee: If there is no human damage caused by the customer, any failure will be after-sales unconditionally and will be solved at zero cost to the customer.