| Quantity: | |
|---|---|
Dongfeng EQ2070 flathead 4WD off-road truck chassis is equipped with Dongfeng Cummins 190 HP engine and 12.5R20 steel wire off-road tyres. This chassis can be converted into 4WD troop carrier, material transport truck, oil truck, water truck, field cooking truck, power supply truck, etc. to meet the needs of various industries. Our company can design and customise special vehicles according to customer's individual use and different scenarios.
Basic configuration | |
|---|---|
| Engine | Cummins B190 33 |
| Gearbox | Manual Six-speed gearbox |
| Transfer Box | Time-shift four-wheel drive with high and low gears |
| Axle | 3.6T/3.6T |
| Tyre | 12.5R20(4+1) |
| Electric Circuit | 24V circuit system |
| Drive type | 4*4 |
| Other | Hydraulic clutch assist, hydraulic steering assist, exhaust brake, multi-circuit air brake system, front and rear trailer hooks, fire extinguishers and other accompanying tools. |
| Applicable situation | Suitable for emergency vehicle repair service in gravel, jungle, mud and many other complex road conditions |
4WD Off-road Vehicle 2070 can give full play to its advantages of high power and high mobility in deserts, mud, sharp curves, steep slopes, potholes, heat, cold and other scenarios, and help customers to complete the tasks that can not be accomplished by conventional vehicles.
Detailed parameter | |
|---|---|
| Chassis Dimension | 6438*2320*2780mm |
| Modification Dimension | 3454mm |
| Wheelbase | 3600mm |
| Tread | 1876/1870mm |
| GVW | 7910kg |
| Curb Weight | 4955kg |
| Maximum Load Capacity | 8510kg |
| Passengers | 3 |
| Rated Power | 125kw |
| Maximum Torque | 560N.m |
| Displacement | 5.9L |
| Maximum speed | 90km/h |
| Approach Angle/departure Angle | 35°/33° |
| Tank volume | 140+80L |
| Minimum ground clearance | 305mm |
Fuel Consumption for 100km | ＜20 |
| Maximum Climbing Grade | 60% |
| Minimum Turning Diameter | 15m |
Note: This configuration is for reference only, please refer to the actual car.
Dongfeng EQ2070 flathead 4WD off-road truck chassis is equipped with Dongfeng Cummins 190 HP engine and 12.5R20 steel wire off-road tyres. This chassis can be converted into 4WD troop carrier, material transport truck, oil truck, water truck, field cooking truck, power supply truck, etc. to meet the needs of various industries. Our company can design and customise special vehicles according to customer's individual use and different scenarios.
Basic configuration | |
|---|---|
| Engine | Cummins B190 33 |
| Gearbox | Manual Six-speed gearbox |
| Transfer Box | Time-shift four-wheel drive with high and low gears |
| Axle | 3.6T/3.6T |
| Tyre | 12.5R20(4+1) |
| Electric Circuit | 24V circuit system |
| Drive type | 4*4 |
| Other | Hydraulic clutch assist, hydraulic steering assist, exhaust brake, multi-circuit air brake system, front and rear trailer hooks, fire extinguishers and other accompanying tools. |
| Applicable situation | Suitable for emergency vehicle repair service in gravel, jungle, mud and many other complex road conditions |
4WD Off-road Vehicle 2070 can give full play to its advantages of high power and high mobility in deserts, mud, sharp curves, steep slopes, potholes, heat, cold and other scenarios, and help customers to complete the tasks that can not be accomplished by conventional vehicles.
Detailed parameter | |
|---|---|
| Chassis Dimension | 6438*2320*2780mm |
| Modification Dimension | 3454mm |
| Wheelbase | 3600mm |
| Tread | 1876/1870mm |
| GVW | 7910kg |
| Curb Weight | 4955kg |
| Maximum Load Capacity | 8510kg |
| Passengers | 3 |
| Rated Power | 125kw |
| Maximum Torque | 560N.m |
| Displacement | 5.9L |
| Maximum speed | 90km/h |
| Approach Angle/departure Angle | 35°/33° |
| Tank volume | 140+80L |
| Minimum ground clearance | 305mm |
Fuel Consumption for 100km | ＜20 |
| Maximum Climbing Grade | 60% |
| Minimum Turning Diameter | 15m |
Note: This configuration is for reference only, please refer to the actual car.
